Submissions from 2024
Experimental Evaluation of Mesh Size in Physically Crosslinked Polymer Gels using Dynamic Light Scattering, Duncan M. Hill
Monitoring Aerosols With Time Resolution With a Rotating Drum Sampler Using LA-ICPMS for Elemental Analysis, John V. Piorkowski
Impact of Processing on Morphology and Thermomechanical Properties of Elastomeric Epoxy Reinforced With an Aliphatic Polyester, Natalie K. Ugenti and Patrick T. Mather
Submissions from 2023
Temperature-Dependent Diffusion in Block Copolymer Organogels, Ridwana Bashar
A Theoretical and Computational Model for Aquaponics Systems, Isabella M. DiGiulio
Solid-State Shear Pulverization: A Comprehensive Study on Polymer Processing Technology from a Systematic Innovation Perspective, Tyler A. Will
Hygroscopic Tandem Differential Mobility Analyzer (HTDMA) Design and Testing for Aerosol Hygroscopic Behavior Studies, Ziheng Zeng
Submissions from 2022
Stability and Structure of Amorphous Solid Dispersions Synthesized via Monodisperse Droplet Evaporation, Robert W. Barlow
Quantifying Zinc Contamination in Laboratory Syringes, Sarah Lindgren
Sustainable Polylactic Acid Foam Development through Solid-State Processing, Philip Onffroy
Submissions from 2021
Design, Preparation, and Characterization of Elastomeric Microcomposites Featuring a Polyanhydride Matrix Reinforced by Thermoplastic Elastomeric Fibers, Caitlin D'Ambrosio
Heavy Metals found in JUUL's Electronic Cigarettes, Joshua F. Gesselberty
Assessing Solvent Viscosity Impact on the Physical Characteristics of Polymeric Organogels, Cameron Hong
An Investigation of the Airborne Particulate Matter Related Health Hazards Present in Makerspaces, Justin Keller
Establishing Independent Tunability of the Mechanical and Transport Properties of Polymer Gels, Lucas Rankin
Complementary Techniques to Study the Behavior of Water and the Effect on Diffusion and Degradation in Hydrogels, Paige Rockwell
Determination of Hydrogel Degradation by Passive Mechanical Testing, Avery Rosh-Gorsky
Submissions from 2020
Study of how the concentration of ozone and α-pinene precursor gases affect the hygroscopicity of the resultant secondary organic aerosol particles, Flutura Berisha
On the Effects of E-Liquid Flavoring on Carbon Monoxide Emissions from E-Cigarettes, Jewel Cook
Why do I have to know this? Engineering in a Globalized Society, Caleb Cunningham
The Challenge and Opportunity of Low-Cost Air Sensor Networks: A Real-World Test Case, David O. Gillett
The Hygroscopicity of Atmospherically Relevant Water-Soluble Sugars and Secondary Organic Aerosols, Kotiba Malek
Optimizing the Stability of Imine-linked 3D Covalent Organic Frameworks through Room Temperature Growth, Grace Rhoades
Submissions from 2019
Polymorphism of Succinic Acid-PVP Dispersions Formed via Monodisperse Droplet Evaporation, Ted Egnaczyk
Dual Self-Assembly of a Selectively Solvated ABA Triblock Copolymer Network Loaded with Reverse Micelles, William Walker
Submissions from 2018
Factors Affecting the Formation of Alpha and Beta Polymorphs in Glutaric Acid Aerosols, Phoebe Belser
CO Detection in E-Cigarettes with Diode Laser Spectroscopy, Rileigh Casebolt
Designing and Characterizing a Truly Green Composite from Bio-based Polymers and Fillers, Mara Kuenen
Stability of Amorphous Particles Formed via Monodisperse Droplet Evaporation, Kurt R. Vostal
Submissions from 2017
Factors That Affect Particle Size Distributions in Electronic Cigarette Effluent, Jordan Evan Berger
Crystallization and Phase Transformation Kinetics of Suberic Acid Particles Formed via Monodisperse Droplet Evaporation, Victoria Maria Karakis
Disulfide Crosslinking Studies to Probe Substrate Binding to Soybean Lipoxygenase-1, Madeline Patricia Milligan
Exfoliation of Carbon Fibers into Nanocomposites via Solid-State Shear Pulverization, Keian Scott Minnich
Mechanical Activation of Small Crystalline Organic Molecules Using Solid-State Shear Pulverization, Katherine Frances Warfel
Submissions from 2016
An Investigation of Amorphous and Unique Organic Molecular Structure Via Monodisperse Droplet Evaporation and Spray Drying, Hannah Theresa Comstock
Synthesis and Properties of Acrylated Epoxidized Soybean Oil Copolymers and Their Composites with Natural Fillers, Andrew Jacob Fox
Synthesis of Pyrrolidone Containing Polyanhydrides for Controlled Drug Delivery, Keith Anthony Mattern
Modeling Transport Phenomena in Solid-State Polymer Processing, Evan Vincent Miu
Modeling SOFC Performance Incorporating Particle Morphologies and Partial Electron Conductivity, Andrew John Lewis Reszka
Modeling Competing Diffusion and Conductivity Effects in Infiltrated Solid Oxide Fuel Cells, Ryan Davis Yappert
Submissions from 2015
Measuring Surface Tension of Secondary Atmospheric Aerosols using Atomic Force Microscopy, Andrew Donald Hritz
Formation of Metastable Polymorphs and Amorphous Structures of Glycine Via Monodisperse Droplet Evaporation, Anna Kristine Maassel
Effects of Drying Rates on Size and Morphology of Nanoparticles, Thuong Ngoc Phan
Submissions from 2014
The Crystallization Kinetics of Polylactic Acid (Pla) Processed Through Solid-State/Melt Extrusion, Brian Bernard Lynch
Formation of Metastable Organic Structures Via Monodisperse Droplet Evaporation, Luke Philip Webster
Efficient Liquid Liquid Extraction By Emulsion Formation and Separation in Robust Milli-Fluidic Devices, Katherine Louise Wiley
Submissions from 2013
Quantifying The Diffusion And Erosion Of Degradable Hydrogels Using A Microfluidic Technique, Anne Elizabeth Ellenberger
The Use Of Amido- And Imido-Functionalized Alpha Hydroxy Acids In The Creation Of Biodegradable Polyesters: An Exploration Of Va, Richard Vincent Natelli
Effect Of Confined Impinging Jet Mixing Processing Parameters On Poly (Lactic Acid) Nanoparticle Morphology, Zachary Oberholtzer
Investigation Of Leucine And Glutamic Acid Properties From The Nanoscale To The Macroscale, Thuong Ngoc Phan
Development And Use Of A Model To Predict Properties Of Infiltrated Solid Oxide Fuel Cell Anodes, Chris Porter
Modeling And Predicting The Performance Of Infiltrated Solid Oxide Fuel Cell Anodes, Mike Synodis
Submissions from 2012
The Investigation of Uniform, Monodisperse Crystalline Particles via the Evaporation of Small Droplets, Kelly M. Carver
Synthesis of 1,1'-(Hexane-1,6-Diyl)Bis(5-Oxopyrrolidine-3-Carboxylic Acid) as a Monomer for a Polyanhydride Drug Delivery System, Scott L. Paradise
Assessing the Validity of Brain Glucose Concentration Measurement Using Microdialysis, Damon Anthony Vinciguerra
Scale Up of PLA Nanoparticle Synthesis by Solvent Displacement and Functionalization of the Particles with a Silica Shell for Targeted Drug Delivery Applications, Douglas R. Vogus
Submissions from 2011
Investigation of Solid-State Shear Pulverization Processing Parameters for Polyethylene-Clay Nanocomposites , Ben Aldrich
Investigation of the Hygroscopic and Morphological Properties of Atmospheric Aerosols, Laura Cook
Modeling Small Molecule Elution From a Hydrogel using a Microfluidic Technique, Stephanie Evans
An Investigation of Two Ceramic Electron Conductors for Use in Solid Oxide Fuel Cell Anodes, Ian Hasson
Continuous, Passive Liquid-Liquid Extraction and Emulsion Separation Within Microfluidic and Millifluidic Devices, Janet Tesfai
Synthesis and Surface Modification of CdSe and CdS Quantum Dots Exhibiting High Quantum Yield, Jeweliet Yost
Submissions from 2010
Solid-State Compatibilization of Immiscible Polymer Blends: Cryogenic Milling and Solid-State Shear Pulverization, Marc Frederick Henry
A Microfluidic Method to Measure Diffusion in Hydrogels, Andrew Lee Litzenberger
Investigation of Aerosol Properties Using Environmental Atomic Force Microscopy, David Marchese
Continuous Formation and Separation of Calcium-Alginate Capsules Containing Viable Mammalian Cells in Microfluidic Devices, Renee Nicole Perry
A General Approach Towards the Synthesis of Amido-Functionalized Biodegradable Polyesters, Joseph Russell
Development of Solid Oxide Fuel Cell Electrodes with High Conductivity and Enhanced Redox Stability, Brandon H. Smith
The Repairing of Misconceptions through the Use of Inquiry-Based Activities, Jeffrey A. Stein
Submissions from 2009
Characterization of Biodegradable Polymer Nanocomposites Fabricated via Solid-State Processing, Alex Fielding