Submissions from 2024
Experimental Investigation of Torsional Strengths of Aluminum Alloys – Circular and Rectangular Solid Sections, Constance W. Ziemian, Marly S. McClintock, and Ronald D. Ziemian
Numerical Investigation of the Influence of Transverse Welds on the Strength of Aluminum Alloy I-Shaped Members – Beams, Constance W. Ziemian and Ronald D. Ziemian
Numerical investigation of the influence of transverse welds on the strength of aluminum alloy I-Shaped members: Columns, Constance W. Ziemian and Ronald D. Ziemian
Submissions from 2023
A Narrow-channeled Backward-facing Step Flow With or Without a Pin-fin Insert: Flow in the Separated Region, James K. Arthur
PIV Measurements of Open-Channel Turbulent Flow under Unconstrained Conditions, James K. Arthur
Using Long Short-Term Memory (LSTM) Networks with the Toy Model Concept for Compressible Pulsatile Flow Metering, Indranil Brahma
Short-Term Vancomycin and Buffer Soaking Does Not Change Rabbit Achilles Tendon Tensile Material Properties, Olivia L. Dyer, Benjamin Wheatley, and Mark A. Seeley
Patellofemoral Joint Load and Knee Abduction/Adduction Moment are Sensitive to Variations in Femoral Version and Individual Muscle Forces, Benjamin Wheatley, Nathan A. Chaclas, and Mark A. Seeley
Aponeurosis Structure-function Properties: Evidence of Heterogeneity and Implications for Muscle Function, Benjamin Wheatley, Olivia L. Dyer, Emily E. Tully, and Mark A. Seeley
How the Geometry and Mechanics of Bighorn Sheep Horns Mitigate the Effects of Impact and Reduce the Head Injury Criterion, Benjamin Wheatley, Emma C. Gilmore, Luca H. Fuller, Aaron M. Drake, and Seth W. Donahue
Submissions from 2022
A Predictive Analytical Model of Thermal Conductivity for Aluminum/Transition Metal High Entropy Alloys, M. J. Abere, E. Ziade, P. Lu, C. B. Saltonstall, Xiaojun Gu, Wendelin Wright, N. Argibay, and A. B. Kustas
Nucleation-accumulation Mode Trade-off in Non-volatile Particle Emissions From a Small Non-road Small Diesel Engine, Indranil Brahma and Odinmma John-Paul Ofili
Experimental evidence that shear bands in metallic glasses nucleate like cracks, Alan A. Long, Wendelin Wright, Xiaojun Gu, Anna Thackray, Mayisha Nakib, Jonathan T. Uhl, and Karin A. Dahmen
Mechanochemical modification of crosslinked low‐density polyethylene: Effect of solid‐state shear pulverization on crosslinks, branches, and chain lengths, Spencer J. Zack, Nathan T. Herrold, and Katsuyuki Wakabayashi
Submissions from 2021
Using Physics to Extend the Range of Machine Learning Models for an Aerodynamic, Hydraulic and Combusting System: The Toy Model Concept. Energy and AI, Indranil Brahma, Robert Jennings, and Bradley Fried
Data-based Estimation and Simulation of Compressible Pulsating Flow with Reverse Flow through an Orifice, Indranil Brahma and Satbir Singh
Deformation Behavior of Single Particle Cold Spray Ti-6Al-4V Splats, Mala M. Sharma, Kiran G. Judd, Jeremy Schreiber, and Tim J. Eden
Submissions from 2020
Applied-force oscillations in avalanche dynamics, Louis W. McFaul, Gregory Sparks, Jordan Sickle, Jonathan T. Uhl, Wendelin J. Wright, Robert Maass, and Karin A. Dahmen
Guidelines for phase change material selection based on a holistic system model, Jonathan E. Rea, Eric S. Toberer, and Nathan P. Siegel
A Techno-Economic Analysis of Solar-Driven Atmospheric Water Harvesting, Nathan P. Siegel and Ben Conser
Submissions from 2019
Rapid Road Friction Estimation using Independent Left/Right Steering Torque Measurements, Craig E. Beal
Extending the Range of Data-Based Empirical Models Used for Diesel Engine Calibration by Using Physics to Transform Feature Space, Indranil Brahma
Measurement and Prediction of Discharge Coefficients in Highly Compressible Pulsating Flows to Improve EGR Flow Estimation and Modeling of Engine Flows, Indranil Brahma
Why the Crackling Deformations of Single Crystals, Metallic Glasses, Rock, Granular Materials, and the Earth’s Crust Are So Surprisingly Similar, Karin A. Dahmen, Jonathan T. Uhl, and Wendelin J. Wright