Submissions from 2015
Tensile and Fatigue Behavior of Layered Acrylonitrile Butadiene Styrene, Sophia Ziemian, Maryvivian Okwara, and Constance W. Ziemian
Submissions from 2014
Advantages and applications of transforming empirical model input space with dimensional models, Indranil Brahma
Analysis and prediction of transient opacity spikes using dimensional modeling, Indranil Brahma
An Investigation into the Accuracy of Orifice Based Flow Estimates for Pulsating Compressible Flows, Indranil Brahma
Thermochemical cycle of a mixed metal oxide for augmentation of thermal energy storage in solid particles, B. Ehrhart, Eric Nicholas Coker, Nathan P. Siegel, and A. Weimer
Annual average efficiency of a solar-thermochemical reactor, Ivan Ermanoski and Nathan P. Siegel
Automated Portal Placement for Arthroscopic Hip Surgery, Emily Geist
Technology advancements for next generation falling particle receivers, Clifford K. Ho, Joshua M. Christian, D Gill, A. Moya, Sheldon Jeter, Said I. Abdel-Khalik, D. Sadowski, Nathan P. Siegel, Hany Al-Ansary, and L. Amsbeck
Simulating the Sooting Propensity of JP-8 with Surrogate Fuels from Hydrocarbon Fluids, Venkatesh Iyer, Suresh S. Iyer, Milton J. Linevsky, Thomas A. Litzinger, Robert J. Santoro, Stephen Dooley, Frederick L. Dryer, and Christopher J. Mordaunt
Design and Preliminary Results of an Atmospheric-Pressure Model Gas Turbine Combustor Utilizing Varying CO2 Doping Concentration in CH4 to Emulate Biogas Combustion, Christopher J. Mordaunt and Wade C. Pierce
Combined Effect of Hot Extrusion and Heat Treatment on the Mechanical Behavior of 7055 AA Processed via Spray Metal Forming, J. M. Schreiber, Z. R. Omcikus, Timothy Eden, Mala Sharma, V. Champagne, and S. N. Patankar
Combined Effect of Hot Extrusion and Heat Treatment on the Mechanical Behavior of 7055 AA Processed via Spray Metal Forming, J. M. Schreiber, Z. R. Omcikus, T. J. Eden, Mala M. Sharma, V. Champagne, and S. N. Patankar
Slow Strain Rate Testing and Stress Corrosion Cracking of Ultra-Fine Grained and Conventional Al-Mg Alloy, Mala M. Sharma, Josh D. Tomedi, and Timothy J. Weigley
Slow Strain Rate Testing and Stress Corrosion Cracking of Ultra-Fine Grained and Conventional Al–Mg Alloy, Mala M. Sharma, Josh D. Tomedi, and Timothy J. Weigley
Physical properties of solid particle thermal energy storage media for concentrating solar power applications, Nathan P. Siegel, M. Gross, Clifford K. Ho, T. Phan, and J. Yuan
Shear bands in metallic glasses are not necessarily hot, Stephanie K. Slaughter, Felicitee Kertis, Erin Deda, Xiaojun Gu, Wendelin J. Wright, and Todd C. Hufnagel
Effect of substrate surface roughening and cold spray coating on the fatigue life of AA2024 specimens, Constance Ziemian, Mala M. Sharma, Ben D. Bouffard, Timothy Eden, and Travis Nissley
Submissions from 2013
Model Predictive Control for Vehicle Stabilization at the Limits of Handling, Craig Earl Beal and J. Christian Gerdes
Anisotropy in plastic deformation of extruded magnesium alloy sheet during tensile straining at high temperature, David E. Cipoletti, Allan F. Bower, and Paul E. Krajewski
Planetary Gear Modal Vibration Experiments and Correlation against Lumped-Parameter and Finite Element Models, Tristan M. Ericson and Robert G. Parker
A New Reactor Concept for Efficient Solar-Thermochemical Fuel Production, Ivan Ermanoski, Nathan P. Siegel, and Ellen B. Stechel
A Kinetostatic Formulation for Load-Flow Visualization in Compliant Mechanisms, Girish Krishnan, Charles Kim, and Sridhar Kota
A Metric to Evaluate and Synthesize Distributed Compliant Mechanisms, Girish Krishnan, Charles Kim, and Sridhar Kota
Factors Affecting the Efficiency of Solar Driven Metal Oxide Thermochemical Cycles, Nathan P. Siegel, James E. Miller, Ivan Ermanoski, Ellen B. Stechel, and Richard B. Diver
Submissions from 2012
Added mass and wave radiation damping for flow-induced rotational vibrations of skinplates of hydraulic gates, K. Anami, N. Ishii, and Charles W. Knisely