Submissions from 2023
PIV Measurements of Open-Channel Turbulent Flow under Unconstrained Conditions, James K. Arthur
Submissions from 2022
A Predictive Analytical Model of Thermal Conductivity for Aluminum/Transition Metal High Entropy Alloys, M. J. Abere, E. Ziade, P. Lu, C. B. Saltonstall, Xiaojun Gu, Wendelin Wright, N. Argibay, and A. B. Kustas
Nucleation-accumulation Mode Trade-off in Non-volatile Particle Emissions From a Small Non-road Small Diesel Engine, Indranil Brahma and Odinmma John-Paul Ofili
Experimental evidence that shear bands in metallic glasses nucleate like cracks, Alan A. Long, Wendelin Wright, Xiaojun Gu, Anna Thackray, Mayisha Nakib, Jonathan T. Uhl, and Karin A. Dahmen
Mechanochemical modification of crosslinked low‐density polyethylene: Effect of solid‐state shear pulverization on crosslinks, branches, and chain lengths, Spencer J. Zack, Nathan T. Herrold, and Katsuyuki Wakabayashi
Submissions from 2021
Using Physics to Extend the Range of Machine Learning Models for an Aerodynamic, Hydraulic and Combusting System: The Toy Model Concept. Energy and AI, Indranil Brahma, Robert Jennings, and Bradley Fried
Data-based Estimation and Simulation of Compressible Pulsating Flow with Reverse Flow through an Orifice, Indranil Brahma and Satbir Singh
Deformation Behavior of Single Particle Cold Spray Ti-6Al-4V Splats, Mala M. Sharma, Kiran G. Judd, Jeremy Schreiber, and Tim J. Eden
Submissions from 2020
Applied-force oscillations in avalanche dynamics, Louis W. McFaul, Gregory Sparks, Jordan Sickle, Jonathan T. Uhl, Wendelin J. Wright, Robert Maass, and Karin A. Dahmen
Guidelines for phase change material selection based on a holistic system model, Jonathan E. Rea, Eric S. Toberer, and Nathan P. Siegel
A Techno-Economic Analysis of Solar-Driven Atmospheric Water Harvesting, Nathan P. Siegel and Ben Conser
Submissions from 2019
Rapid Road Friction Estimation using Independent Left/Right Steering Torque Measurements, Craig E. Beal
Extending the Range of Data-Based Empirical Models Used for Diesel Engine Calibration by Using Physics to Transform Feature Space, Indranil Brahma
Measurement and Prediction of Discharge Coefficients in Highly Compressible Pulsating Flows to Improve EGR Flow Estimation and Modeling of Engine Flows, Indranil Brahma
Why the Crackling Deformations of Single Crystals, Metallic Glasses, Rock, Granular Materials, and the Earth’s Crust Are So Surprisingly Similar, Karin A. Dahmen, Jonathan T. Uhl, and Wendelin J. Wright
Multifunctional Bioceramic Composite Coatings Deposited by Cold Spray, Kiran G. Judd, Mala M. Sharma, and Timothy J. Eden
From Critical Behavior to Catastrophic Runaways: Comparing Sheared Granular Materials with Bulk Metallic Glasses, Alan A. Long, Dmitry Denisov, Peter Schall, Todd C. Hufnagel, Xiaojun Gu, Wendelin J. Wright, and Karin A. Dahmen
Force Oscillations Distort Avalanche Shapes, Louis W. McFaul, Wendelin J. Wright, Jordan Sickle, and Karin A. Dahmen
Solar thermoelectricity Via Advanced Latent Heat Storage, Michele L. Olsen, Eric S. Toberer, David S. Ginley, Philip A. Parilla, Emily L. Warren, Aaron D. Martinez, Jonathan E. Rea, Corey Lee Hardin, Christopher J. Oshman, and Nathan P. Siegel
Prototype latent heat storage system with aluminum-silicon as a phase change material and a Stirling engine for electricity generation, Jonathan E. Rea, Christopher J. Oshman, Abhishek Singh, Jeff Alleman, Greg Buchholz, Philip A. Parilla, Jesse M. Adamczyk, Helena-Nikolai Fujishin, Ortiz M. Brenden, Tara Braden, Robert T. Bell, Nathan P. Siegel, Ginley S. David, and Eric S. Toberer
Stress Corrosion Cracking Resistance of Cold-Sprayed Al 6061 Deposits Using a Newly Developed Test Fixture, Mala M. Sharma, Jeremy Schreiber, Timothy Eden, and Victor Champagne
Essentials of Materials Science and Engineering, 4th edition, Wendelin Wright
Submissions from 2018
Coupled lateral-longitudinal vehicle dynamics and control design with three-dimensional state portraits, Craig E. Beal and Christina Boyd
Vehicle control synthesis using phase portraits of planar dynamics, Carrie G. Bobier-Tiu, Craig E. Beal, John C. Kegelman, Rami Y. Hindiyeh, and J. Christian Gerdes