This data sheet shows the measurements taken from vane shear tests in a soil-bentonite slurry trench cutoff wall. The vane obtained for the test was built in accordance to the ASTM standards of designation 2573. Due to the softness of the clay, to ensure the feasibility of acceptable torque resolution, the vane’s diameter, shaft diameter, and vane height at 100 mm, 16.5 mm, and 250 mm respectively were the largest acceptable sizes to use from the abovementioned standards.
(c) 2019 Jeffrey Evans, use of this work is permitted in compliance with the assigned license.
Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.